EMT Practice Test

1. Question Content...

---

Question1: What is the maximum number of chassis supported under a single UCS Manager domain?

Question2: How can the Network Appliance field alerts be received?

Question3: An administrator decides to connect storage directly to the UCS Fabric Interconnect to support FCoE within a FlexPod configuration.
In this scenario, which port type should be defined on the Fabric Interconnect ports connected to the storage controller?

Question4: Through which of the following requests can't the Browser be directed to the NetCache?

Question5: What command displays routing tables for NetCache appliances?

Question6: What should occur if the auth ftp command was used in a proxy configured environment?

Question7: Which of the following does the NetCache not use when sending a packet beyond the local area network?

Question8: State whether the following statement is true or false. In a forward proxy deployment, the NetCache appliance is normally installed close to the end user and administered by the service providers.

Question9: How many disk drives does a C2100 appliance use?

Question10: Which of the following commands would you make use of to view the available options for the showing config.http.acl command?

Question11: Where would the best place to find information about log headers, such as x-cs-headerlength?

Question12: Which of the following are impossible using the NetCache bandwidth allocation rules?

Question13: You want to ensure minimal disruption to the UCS fabric in the case of a port failure between the blade chassis and the Fabric Interconnects of your FlexPod configuration.
Which industry best practice would you implement as a global configuration to accomplish this task?

Question14: Which two of the following functions can the NetCache appliance's clock carry out?

Question15: You are designing a FlexPod Express solution based on VMware for a customer that requires both SAN boot and VM datastores up to 100 TB in size.
Which configuration would satisfy the requirements in this scenario?

Question16: You are configuring VMware ESXi to support QoS across the entire FlexPod environment.
Which MTU setting is required to accomplish this task?

Question17: For which of the following would the "NTLM Cache" feature normally be used?

Question18: Which method can be used to manage the NetCache appliances but can't be used to access the Command Line Interface (CLI)?

Question19: The default hierarchy wholly consists of a child and a parent in NetCache where the parent in the NetCaches has an option of being in a cluster configuration. State whether the above statement is true or false.

Question20: According to FlexPod CVDs, what is the recommended MTU size for iSCSI logical interfaces (LIFs) on the NetApp Storage Virtual Machine (SVM)?

Question21: State whether the following statement is true or false. A packet trace captured by the NetCache can capture traffic to/from a specific IP address.

Question22: A customer is designing a FlexPod with VMware vSphere 6.0. There is a requirement to centralize backup management of virtual machines with the ability to view storage configuration details from within the vSphere Web client. Automatic configuration of ESXi host storage settings is also needed.
Which tool accomplishes all of the requirements?

Question23: Which of the following commands allows the NetCache interface configuration to be viewed?

Question24: What are three ways to configure a UCS 5108 server chassis power supply? (Choose three.)

Question25: You are designing a FlexPod configuration with the Red Hat Enterprise Linux OpenStack platform.
What is the OpenStack compute service for virtual machine management?

Question26: A customer needs to replicate NetApp FlexVols in an application agnostic manner for their virtualized and non-virtualized workloads. The customer also needs to migrate between on-prem, NetApp Private Storage (NPS), and ONTAP Cloud instances.
Which NetApp feature satisfies these requirements?

Question27: Which of the following options log only reports displays Web request data?

Question28: You are a data center architect at a service provider. You need to configure a new multi-tenant FlexPod service offering.
Which three UCS Manager features will you need to accomplish this task? (Choose three.)

Question29: One of these NetCache Utility features is capable of capturing packets that are currently in the process of arriving or leaving via the network interfaces, which one is it?

Question30: One of the items below cannot be set for NetCache authentication groups, which one is it?

Question31: For customers who want to virtualize existing EMC, HP, Hitachi, and NetApp E-Series storage arrays, which feature is required?

Question32: You are building a new FlexPod solution and want to verify that you have cabled all the components according to FlexPod design best practices prior to putting your solution into production.
Which tool would you leverage to validate the cabling?

Question33: What is the traceroute command used for?

Question34: A customer wants to extend a FlexPod configuration across multiple sites using FlexPod with NetApp MetroCluster. One requirement is to extend the L2 domain across sites to enable live migration for critical applications.
Which Nexus 7000 feature enables this migration?

Question35: Via which of the following can the console password be changed?

Question36: Which one of the following is the CLI equivalent command used for installing, committing, and rebooting NetCache software images from NetCache GUI guessing that the path for the server is http://10.1.1.1/nc- image.zip?

Question37: Which of the following occurs when the diag dump command is selected?

Question38: The correct manner in which to open a Network Appliance support ticket is to ____ at the NOW site?

Question39: When would the ideal time to use the NetCache DNS Tree Search option?

Question40: Which of the following statements most accurately describes what would occur if she requested for www.microsoft.com considering the following ACL policies, assuming user Johnny is a member of the Engineering group?
deny group Engineering and smartfilter gambling
auth any
allow group Execs
deny any

Question41: A customer is designing a FlexPod with VMware 6.0 in a SAN boot environment using FCoE. The customer has pre-determined the WWPN values for the NetApp LIFs and the UCS vHBAs. The customer is now working on the design workflow for the SAN boot process.
In this scenario, which three FlexPod environment objects are required for SAN connectivity? (Choose three.)

Question42: You are asked to build a FlexPod solution using Application Centric Infrastructure (ACI).
What are two ways to address the network requirements for high availability in this scenario? (Choose two.)

Question43: State whether the following statement is true or false. The backup/restore option in the Maintenance section of the Appliance Manager can possibly be used to restore and backup files of configuration type only.

Question44: Which two statements are true about VXLAN configured on Cisco Nexus 9000 Series switches operating in NX-OS mode? (Choose two.)

Question45: Which two server families are part of the FlexPod Express Technical Specifications? (Choose two.)

Question46: FlexPod Datacenter with Cisco UCS Mini supports which Fabric Interconnect model?

Question47: One of the below is the correct command to download software directly to the NetCache, which one is it?

Question48: You want to ensure optimum Layer 2 latency and performance for server-to-server communications when configuring high availability for bare-metal operating systems.
In this scenario, which action would you perform to accomplish this task?

Question49: What occurs on the NetCache once you enable DNS caching?

Question50: What would be the reason for one using the NetCache Appliance Manager's Maintenance > Software > Error Pages feature?

Question51: One of the below will allow all of the NetCache appliance's present configuration settings to be viewed, which one is it?

Question52: Once created and is successfully running, it is possible that NetCache groups be edited to revise names, permissions, or ACLs. State whether the above statement is true or false

Question53: Which of the following options best describes what the configure "Shared User Hosts" feature that is found under Appliance Manager's Setup > FTP > Caching Behavior is used for?

Question54: Which two of the following vendors content filtering databases currently have support on the NetCache?

Question55: Two of the below options will not be added to the Autosupport message if NetCache Autosupport has been configured to show minimal detail, which two is it?

Question56: A FlexPod design will be using a 4-node NetApp storage solution and requires a switch for the cluster interconnect.
Which two switches are valid in this scenario? (Choose two.)

Question57: One of the below ACLs will OK the requests from Engineering groups to www.netapp.com, which one could it be?

Question58: State whether the following statement is true or false. The NetCache appliances use RAID 4 with 1 parity disk and 1 or more disk for data purposes only.

Question59: You are configuring a UCS host for an iSCSI SAN boot.
In this scenario, which storage variable must be recorded for boot policy creation?

Question60: A customer wants to design virtual machines provisioned across their VMware vSphere cluster. They need to leverage resource sharing and load balancing of their virtual machines.
Which VMware feature satisfies these requirements?

Question61: The NetCache appliance cannot be used for which of the following?

Question62: What must be done in order to add a user to the appliance database, which two of the following you must enter?

Question63: Which of the following statements best describes what occurs with system messages?

Question64: You are asked to design an application-focused data center using policy-based networking.
Which architecture is valid for this new design?

Question65: Which mode must your Fabric Interconnects be using to participate in the Spanning Tree Protocol (STP) and send Bridge Port Data Units (BPDUs)?

Question66: An administrator is designing a FlexPod with the Nexus 5548UP series switches to SAN boot all of the ESXi hosts over FCoE, and attach to the VM datastores over NFS.
In this scenario, which license will be required on the Nexus switches?

Question67: Which of the following statements best describe what must be done when configuring a NetCache as a reverse proxy?

Question68: Which of the following options shows the most accurate average response time shown in many different NetCache statistical displays?

Question69: State whether the following statement is true or false. All NetApp Services do not include System Administration Services.

Question70: One of the below NetCache appliances maximum storage capacity is 504G Bytes, which of the following is it?

Question71: One of the below object types cannot run a cache, which one is it?

Question72: You are configuring Cisco UCS servers for Fibre Channel SAN boot and want to perform zoning on your Cisco Nexus 5000 series switches.
Which statement is correct in this scenario?

Question73: Which high-availability feature is supported by FlexPod with Unified Computing System Mini (UCS Mini) in a single chassis?

Question74: Which two resources should be used by the NetCache to successfully build its routing table?

Question75: A customer is designing a FlexPod environment and is preparing for an ESXI host installation. High availability is a requirement for the FlexPod design. The ESXI servers will be built with new iSCSI boot LUNs.
Which two NetApp design components are required for this task? (Choose two.)

Question76: Which of the following must you successfully specify when configuring the NTLM authentication?

Question77: Which port type would you configure when you connect a chassis to the Fabric Interconnects?

Question78: In addition to what is used in a FlexPod Datacenter design, which new hardware component is required to support Cisco Application Centric Infrastructure (ACI)?

Question79: One of the services below cannot be categorized as a service supported by ICAP, which option is it?

Question80: View the Exhibit.

A customer wants to ensure that FlexPod Datacenter connections to the storage layer are highly available.
Which two configurations shown in the exhibit satisfy the customer's requirements? (Choose two.)

Question81: Two of the below statements are untrue. Select them.

Question82: An architect is designing an Oracle FlexPod solution that must support non-disruptive upgrades across all of the hardware components. The Oracle workload requires a 4-node FAS system, including the NetApp CN1610 cluster interconnect switches.
In this scenario, how many 10GbE ISL links are required between the two cluster interconnect switches?

Question83: State whether the following statement is true or false. The sysstat command allows the performance statistics to be viewed, which consists of the present CPU usage, the full amount of network I/O, and the amount of disk I/O.

Question84: State whether the following statement is true or false. The flush cache command does not reduce disk space utilization.

Question85: An administrator wants to see both the NetApp storage utilization values and the UCS port network capacity in the same dashboard.
Which management tool provides this capability?

Question86: With clustered Data ONTAP 8.3, which construct contains data volumes and one or more LIFs through which they serve data to clients?

Question87: An architect is attempting to confirm that all logical interfaces (LIFs) are properly planned with a new clustered Data ONTAP 8.3 implementation. The customer wants to provision NFS datastores across the cluster to allow client access.
In this scenario, which LIF role satisfies this requirement?

Question88: To which of the following is NetCache not able to validate authentication credentials?

Question89: Which of the following actions must you take in order to reach the NetCache firmware prompt ("OK prompt")?

Question90: Which UCS Manager feature will allow you to have a consistent server configuration within the system?

Question91: One of the access methods below will maintain boot messages right across all reboots, which one is it?

Question92: One of the below ACLs will enable the allowance requests from Engineering groups to www.netapp.com, which one is it?

Question93: During the design phase of an NFS-only FlexPod environment, the architect wants to ensure that the proposed switch and storage hardware is fully supported within the FlexPod architecture.
Which resource should they consult to confirm support for the design?

Question94: State whether the following statement is true or false. Disk ID is represented in x.y format, where x refers to the host adaptor and y refers to the disk ID number.

Question95: State whether the following statement is true or false. The NOW site holds data maintained by the Network Appliance. This information consists of records and customer product information but this data is only available to authorized users.

Question96: One of the actions below cannot be accomplished with the NetCache command line, which one is it?

Question97: When planning your network design, you want to ensure the fastest possible network convergence and reduce the potential for network "split-brain" scenarios.
Which Cisco feature will you enable to satisfy this requirement?

Question98: How would you know when the NetCache logs switched?

Question99: What are two valid cluster interconnect switches? (Choose two.)

Question100: State whether the following statement is true or false. A multi-mode VIF merges two physical interfaces together where traffic is then active on both of the physical interfaces.

Question101: You are deploying VMware on a FlexPod and require back up and space efficient cope services for VMware virtual machines.
Which two are required to accomplish this task? (Choose two.)

Question102: In which of the following sites can a complete list of Network Appliance support centers be found?

Question103: Which of the following would be the default HTTP proxy port on the NetCache?

Question104: A customer is evaluating management tools for a new FlexPod Infrastructure. They desire a tool that can orchestrate the provisioning of UCS compute nodes, NetApp storage, and VMware networking.
Which tool satisfies the requirements of this customer's heterogeneous environment?

Question105: Which of the following are supported interface types?

Question106: What are three capabilities of Config Advisor as it pertains to a FlexPod solution? (Choose three.)

Question107: State whether the following statement is true or false. All defective parts require a RMA before to sending the product to Network Appliance.

Question108: You are designing your drive layout for a NetApp E-Series storage array. You want to minimize performance bottlenecks by spreading data, parity, and spare capacity across all available drives.
In this scenario, which feature would accomplish this task?

Question109: State whether the following statement is true or false. To enable the NetCache appliance to load balance between a pool of Web servers you must specify the server IP addresses in the NetCache acceleration rule.

Question110: State whether the following statement is true or false. The default NetCache HTTP administration port is
3132 and it is one of the configurable options.

Question111: State whether the following statement is true or false. When configured as an accelerator, the NetCache appliances are typically stationed near the server.

Question112: Two of the below statements are exactly the same? Choose the two.

Question113: You are designing a new FlexPod-based data center and configuring Virtual Port Channels (vPC) to provide the highest bandwidth throughput, link, and device resiliency to each of your FlexPod systems.
In this scenario, which two statements are true? (Choose two.)

Question114: An ACI customer would like to enable devices from one Endpoint Group to talk to another Endpoint Group.
Which ACI construct is required to enable this capability?

Question115: Which of the following commands are used for running automated diagnostic analysis routines?

Question116: Which of the following syntaxes are used to receive extensive help definition for particular commands?